Home > Academics > Course Descriptions > Electrical Engineering
ELECTRICAL ENGINEERING - EENG (Semester)
EENG 1105 | DC Circuits & Devices
Prerequisite: MATH 1120 or equivalent
3 credits
An examination of the behavior of passive devices in transient and steady state DC circuits. Topics include device construction and packaging. Ohmic and nonohmic conduction, voltage, current, power and resistance calculations in series, parallel and series-parallel circuits. Laboratory consists of development of prototyping skills and verification of circuit operation.
EENG 1115 | AC Circuits & Devices
Prerequisite: EENG 1105 or equivalent
3 credits
An examination of the frequency response of reactive circuits. Topics include voltage, current and power calculations in series, parallel and series-parallel circuits. Applications of resonance and filtering are discussed.
EENG 1185 | Electrical Machinery
Prerequisites: PHYS 1117 and EENG 1115
3 credits
An examination of the characteristics of power transmission and distribution equipment. DC and single phase and poly phase AC machinery are covered including servo machines. Transformers, transducers, and industrial controls are also studied.
EENG 1199 | Seminar
1-3 credits
This course will be a discussion of particular problems related to the student’s chosen program and areas of interest.
EENG 2205 | Digital Electronics
Prerequisite: EENG 1105 or equivalent
4 credits
An examination of number systems and techniques of logical reduction. Pulse and logic circuits, counters, registers, logic families, integrated circuits and basic elements of digital design are discussed. Including DA & AD convertors microprocessor & microcontrollers.
EENG 2215 | Analog Circuits & Devices
Prerequisite: EENG 1115 or equivalent
4 credits
An introduction to the characteristics, specifications, packaging, and applications of discrete devices and low scale integrated circuits.
EENG 2254 | Computer Architecture & Design
Prerequisites: CSCI 1140 and 1141 or permission of instructor
4 credits
This is an introductory course into computer architecture. This class will assemble a single board computer with a lecture section before each section to describe how the section works. Use of Oscilloscope, Digital Logic probe and Millimeter are used to make measurements and troubleshoot each section.
EENG 2255 | Digital Communications
Prerequisites: EENG 2205 and ENDS 1145
Corequisite: CSCI 1141
3 credits
An examination of various digital communications techniques. Topics covered will include modulation, sampling, coding and decoding, multiplexing, error detection and correction, modems, LANs, and WANs.
EENG 2285 | Manufacturing Control Systems
Prerequisites: EENG 2205 and 2215
3 credits
Introduction to the use of programmable logic controllers in industry. Topics include ladder logic programming, sensors used in manufacturing control systems and applications of PID loops. Allen Bradley Controllers are the PLC used in this course. Laboratory complementing class work.
EENG 2299 | Research Project
Prerequisite: Final standing as a major in Electrical Engineering Technology or permission of instructor
3 credits
Independent study resulting in a technical project, research paper, or a combination of these. Selection of the area of study is made in consultation with the instructor and must be approved by him/her. |
